30/08/2022
BPW - General tools
|
BPW special tools and measuring devices
Special tools and measuring devices have a long tradition at BPW Bergische Achsen KG and are based on decades of experience. The existing range of tools has been systematically improved with each new generation of axles and expanded by new products. For the maintenance and repair of its ECO Disc TS2/ TSB disc brake, BPW offers a new tool case (BPW code ηο. 99.00.000.9.72) that keeps all the tools that may be required to hand. For an existing tool case TSB, BPW offers a supplemental set (BPW item nο. 09.801.08.82.0) which contains all additional tools for the TS2. ln addition, BPW offers special measuring devices for checking dimensions on axles and suspensions (toe-in, toe-out etc.).
|
Version
Tools must prove their worth in hard, everyday use. Only then does it become clear whether tools are up to the demands of the real world.
|
Use of high-quality materials
Τορ quality materials are the key to high quality tools. Continuous quality assurance guarantees consistent quality.
|
Favourable cost-performance ratio
Quality is not always obvious at first glance (e.g. materials). Buying quality tools is often the better-value solution in the long run. This is the case especially whenever tools are required on a regular basis and trouble-free use has to be ensured at all times.
- The special tools gauarantee that all recommended service work on the BPW ECO Disc (TS2 3709 / 4309 as well as TSB 3709 / 4309 / 4312) can be performed safely and easily.
- ΑΙΙ work on the vehicle is only allowed to be performed by employees of the commercial vehicle industry and the commercial vehicle trade who have the appropriate technical proficiency. Always follow the safety instructions issued by the vehicle manufacturer.
- Observe the BPW workshop manual (www.bpw.de).
|
Long-life, low wear
BPW tools are designed to be particularly resistant to wear and tear, and guarantee an extremely long service life, even with frequent use.
|
Easy to handle
The best solutions are always the simplest ones. This statement also particularly applies to tools. This is the reason whey BPW tools are geared specifically to meet technical requirements. Solutions that do not meet practical requirements are rigorously weeded out at the development stage. Details on the correct use of the tools can be found in the respective workshop manuals. For more tools see the BPW tools catalogue.
|
|
Contents of tool case |
|
No. |
Designation |
TSB |
TS2 |
BPW code no. |
Dimension |
Page |
T1 |
Threaded spindle |
• |
• |
02.0130.39.10 |
Tr 20 x 2 /SW ww |
78 |
T2 |
Ball bearing |
• |
• |
02.0130.40.10 |
Φ 20.5/40 x 14.5 |
78 |
T3 |
Sleeve |
• |
• |
02.1410.26.00 |
Φ 20.2/42 x 75.5 |
78 |
T4 |
Press-out tool for movable and fixed bearings |
• |
• |
02.0130.41.10 |
Φ 20.5/40.1 x 71 |
78 |
T5 |
Pressing tool (movable bearing) |
• |
|
02.0130.42.10 |
Φ 20.5/45.8 x 48 |
78 |
T6 |
Nut |
• |
• |
02.5270.37.00 |
Tr 20 x 2 / SW 32 |
78 |
T7/T20 |
Counter-hold tool |
• |
• |
02.1421.25.00 |
Φ 20.2/53 x 13 |
78 |
T8 |
Pressing tool (fixed bearing) |
• |
• |
02.0130.43.10 |
Φ 20.5/45.8 x 90 |
78 |
T9 |
Press-on tool (plastic bellows) |
• |
|
02.0130.45.10 |
Φ 26.1/50 x 60 |
78 |
T10 |
Torx spanner return mechanism |
• |
• |
02.0130.44.10 |
ΤΧ25 |
79 |
T11 |
Two-hole spanner for coarse dirt seal |
• |
• |
02.3516.20.00 |
|
79 |
T12 |
Adapter for moveable bearing screw |
• |
• |
02.0130.46.10 |
SW 14 /SW 24 |
79 |
T13 |
Adapter for plastic cap |
• |
• |
02.0130.47.10 |
SW 14 / SW 12 |
79 |
T14 |
Adapter for torque wrench (movable bearing) |
• |
• |
02.0130.48.10 |
WAF 14 |
79 |
T15 |
Adapter for torque wrench (plastic cap) |
• |
• |
02.0130.49.10 |
WAF 14 |
79 |
T16 |
Ring for pulling in wheel studs |
• |
• |
02.5683.92.00 |
Φ 23/46 χ 15 |
79 |
T17 |
Adapter for fixed bearing bolt |
• |
• |
02.0130.64.10 |
SW 14 / SW 14 |
79 |
T18 |
Adapter for movable bearing screw |
• |
• |
02.0130.65.10 |
SW 14 / SW 14 |
79 |
T19 |
Mounting tool for the bellows |
• |
|
02.0130.80.10 |
Φ 27 .6/62 x 32 |
79 |
T21 |
Pressing tool for loose bearing |
|
• |
02.0130.72.20 |
Φ 02.0130. 72.20 |
78 |
T22 |
Piston for pressing tool bellows |
|
• |
02.0130.74.20 |
Φ 83 / Μ 20 x 2 |
80 |
T23 |
Screw for pressing tool bellows |
|
• |
02.0130.73.20 |
Μ 14 x 2 |
80 |
T24 |
Adapter for pressing tool bellows |
|
• |
02.4319.42.00 |
SW 24 / Μ 20 x 2 / Μ14 x 2 |
80 |
SW = Spanner width
|
BPW special tools for work |
Item / BPW code no. / name / dimension |
Τ1 02.0130.39.10 Threaded spindle TR 20 χ 2 / SW 22 |
|
Extractor tool for movable bearings, consisting of item Τ1, Τ2, Τ3, Τ4, Τ6 |
|
|
Τ2 02.0130.40.10 Ball bearing Φ 20.5/40 x 14.5 |
|
Τ3 02.1410.26.00 Sleeνe Φ 20.2/42 x 75.5 |
|
Pressing tool for movable bearing, consisting of item Τ1, Τ2, Τ3, Τ4, Τ5, Τ6, Τ7/Τ20 (TSB) Τ1, Τ2, Τ3, Τ4, Τ21, Τ6, Τ7/Τ20 (Τ52) |
|
|
Τ4 02.0130.41.10 Press-out tool for moνable and fixed bearings Φ 20.5/40.1 x 71 |
|
Τ5 (only for TSB) 02.0130.42.10 Pressing tool (moνable bearing) Φ 20.5/45.8 χ 48 |
|
Press-out tool for movable bearing, consisting of item Τ1, Τ2, Τ3, Τ4, Τ6 |
|
|
|
Τ21 (only for Τ52) 02.0130. 72.20 Pressing tool (moνable bearing) Φ 20.5/45.8 x 50 |
|
Τ6 02.5270.37 .00 Nut TR 20 x 2 / SW 32 |
|
Τ7/Τ20 02.1421.25.00 Counter-hold tool Φ 20.2/53 x 13 |
|
Pressing tool for fixed bearing, consisting of item T1, T2, T6, T7/T20, T8 |
|
|
Τ8 02.0130.43.10 Pressing tool (fixed bearing) Φ 20.5/45.8 x 90 |
|
Τ9 (only for TSB) 02.0130.45.10 Press-on tool (plastic bellows) Φ 26.1/50 x 60 |
|
|
|
Τ10 02.0130.44.10 Torx spanner for return mechanism ΤΧ25 |
|
Τ11 02.3516.20.00 Two-hole spanner for coarse dirt seal |
|
|
|
Τ12 02.0130.46.10 Adapter for movable bearing screw SW 14/SW 2 |
|
Τ13 02.0130.47.10 Adapter for plastic cap SW 14/SW 12 |
|
|
|
Τ14 02.0130.48.10 Adapter for torque wrench (movable bearing) SW 14 |
|
Τ15 02.0130.49.10 Adapter for torque wrench (plastic cap) SW 14 |
|
|
|
Τ16 02.5683.92.00 Ring for pulling ίη wheel studs Φ 23/46 x 15 |
|
Τ17 02.0130.64.10 Adapter for fixed bearing bolt SW 14/SW 14 |
|
|
|
Τ18 02.0130.65.10 Adapter for movable bearing screw SW 14/SW 14 |
|
Τ19 (only for TSB) 02.0130.80.1 Ο Mounting tool for the bellows Φ 27.6/62 x 32 |
|
|
|
BPW supplemental set TS2 - 09.801.08.82.0 |
ltem |
BPW code no. |
Designation |
Dimension |
Τ7/Τ20 |
02.1421.25.00 |
Counter-hold tool |
Φ 20.2/53 x 13 |
Τ21 |
02.0130.72.20 |
Pressing tool (movable bearing) |
Φ 20.5/45.8 x 50 |
T22 |
02.0130.74.20 |
Piston for pressing tool bellows |
Φ 83 / Μ 20 x 2 |
Τ23 |
02.0130.73.20 |
Screw for pressing tool bellows |
Μ14χ2 |
Τ24 |
02.4319.42.00 |
Adapter for pressing tool bellows |
SW24 /M20x2 /M14x2 |
|
|
|
|